Prime Lock Plus Primer Sealer is a fast-drying alkyd resin primer and sealer for blocking tough stains.  Seal burned or charred wood or use as an enamel under-coater

prior to latex or oil topcoats. Apply to bleeding woods such as

cedar and redwood to block tannin stains. Excellent as a primer

for walls before wallpapering for easy positioning and removal.

Lock in common household stains from food, grease and graffiti.

Prime Lock Plus provides excellent adhesion over difficult to

paint surfaces such as glossy paint, Formica, tile, Marlite, PVC

and tile.can be top-coated with any latex or alkyd finish coat.

Key Features

• Multi-purpose primer/sealer
• Excellent adhesion to glossy surfaces
• Seals water stains, smoke damage, tannin, and more
• Prevents bleed-throughQuick-drying
• Excellent enamel holdout
• For interior/exterior use
• Penetrating alkyd formula

Reduced Odour Oil-Based Primer is an alkyd primer/sealer formulated to produce lower odour levels compared to other alkyd primers.This stain-blocking primer is effective at sealing water stains, tannin, nicotine stains and more on interior drywall, plaster, wood, masonry, acoustical tile, painted surfaces and wallpaper. 

Key Features

• Blocks stains
• Quick drying
• Excellent adhesion
• Seals porous surfaces 
• Can be used to spot prime exterior wood, shingles, and composition siding
• Top-coat with alkyd or latex paints

Zinsser Cover Stain is an oil-base primer-sealer and is particularly effective for covering and blocking tough stains like water, nicotine, smoke and bleeding from wood tannins. Zinsser Cover Stain Oil-Based Primer is an all-purpose oilbased primer designed for interior or exterior applications where an oil-base primer is desired. Cover-Stain provides excellent penetration and flexibility and has excellent adhesion and stain blocking properties.

Key Features

• Fast drying – Recoat in 1 hour
• Sticks to all surfaces and sands easily
• Designed for interior and exterior surfaces
• High hiding formula blocks most stains from nicotine,
• fire, smoke and water damage
• Excellent tannin blocker – use to seal bare cedar and
• redwood
• Easy paint thinner clean-up

Zinsser® Odorless Oil-Base Stain Blocking Primer is specifically designed to seal tough stains in indoor areas where people are present.  It is designed for

interior applications where oil-base performance is required

but odor is a concern. It is suitable for sealing nicotine, fire,

smoke and water stains on surfaces such as wood molding,

trim and spackled areas. It adheres to paneling, kitchen

cabinets, glossy paints and hard-to-paint objects, such as

wicker, louvers, picture frames, and arts and crafts. It is

compatible with all latex and oil-based architectural paints.

Key Features

• Seals stains from water, fire and smoke damage
• Oil-base performance when odor is a concern
• Non-yellowing, dries flat, sands easily
• Use with all topcoats
• 350 VOC

Zinsser B-I-N is the original shellac-based primer-sealer that is known for permanently blocking stains, odors, and wood knots.

It’s specifically designed to block stubborn stains, including water stains, smoke damage, pet stains, and knots in wood.

Key Features

• Sticks to surfaces with no sanding
• For interior and spot exterior use
• Toughest on covering and blocking extreme stains
• Seals challenging pet, smoke, and musty odors
• Seals knots and sap streaks

Tremclad Red Oxide Primer is a high-performance, oil-based undercoat that actively inhibits rust formation and creates an optimal bonding surface for bare or rusted metal. It is widely used to prepare farm equipment, trailers, and automotive panels before top-coating.

Key Features

• Superior Rust Inhibition: Specially formulated to bond with severely pitted or sandblasted metal, preventing future corrosion.
• Excellent Adhesion: Creates a flat or satin-textured base that allows top coats to adhere much more effectively.
• Application: Can be applied directly to metal with superb flow and coverage.
• Dry Time: Tack-free in roughly 15 to 30 minutes; safe to top-coat in 1 to 2 hours.
• Temperature Range: Best applied between 10°C to 32°C (50°F to 90°F).

Sheen: Very Flat / Matte.